ENDUIT

DEFINITION
• Smoothing plaster based on emulsion in aqueous phase and carefully selected fillers for interior work.
• Pasty appearance.

PROPERTIES
- Very easy to spread.
- Smooth finish with invisible overlaps
- Fast drying
- Very easy to sand.
- Great filling power.

DESTINATION
Recommended for Interior smoothing on:
- Coatings with hydraulic binders.
- Plaster and derivatives.
- Wood and derivatives.
Walls in maintenance: Make a preliminary application of printing to ensure good performance

IMPLEMENTATION

• Smooth the coating with a coating knife.
• Sand the balres.
• Can be extended with a little water to facilitate installation.

New construction
• Make sure the supports are dry, clean.
Maintenance works
• Remove non-adherent parts by scraping, brushing or sanding.

APPLICATION METHOD
Dilution: Ready to use
Application equipment: Coating knife, Smoother, Spatula, Trowel.
Equipment cleaning: the coating residue is removed after drying by rubbing, clean with water if necessary.

PRECAUTIONS FOR USE
- Do not apply on polystyrene, on bonded coatings, or on the exterior.
- Do not apply at a temperature <8 ° C and> 35 ° C and a humidity rate> 70%.
- Do not apply on overheated funds.

TECHNICAL CHARACTERISTICS

Final aspect of the dry film: Matt and smooth
Density: 1.85 + - 0.05
Dry extract: 73% + - 1
Coverage & Yield: 1 kg / m2 depending on the condition of the support and the application method.
Recoverable: 2 to 4 hours
Sanding: after 12 or 24 hours
Storage: 12 months in original unopened packaging and stored in a cool place.
Packaging: 20kg / 5kg