EVOLAC

DEFINITION
• Glossy finish paint based on acrylic emulsion in aqueous phase.
• Low cov paint with gloss properties similar to solvent paints.
• Pot appearance: Slightly creamy liquid.

PROPERTIES
- Very good opacity and resistance to abrasion.
- Excellent adhesion and ease of application.
- Good tense and shiny.
- Odorless.
- Not yellowing.

DESTINATION
Recommended for indoor and outdoor use for careful finishing work.
• Concrete, coated with hydraulic binders and plaster with Fixoprim in primer.
• Wood with glyceromate primary without such old wood.
• Metals covered with Pronet.

IMPLEMENTATION

SURFACE PREPARATION
New construction
• Make sure the supports are dry, clean, and well drained (coated with cement).
• Apply 1 coat of Fixoprim beforehand.

Maintenance works
• Remove non-adherent parts by scraping, brushing or sanding.
• On flouring walls, apply a diluted coat of Fixoprim before applying the finish.
• To be coated if necessary with Color Coating.
• On old glossy paints, sand to break the gloss, then dust and wipe to remove the powdery parts.

APPLICATION METHOD
Application: 2 crossed coats.
Thinner: Water
Application equipment: Brush - Bristle roller 5 mm - Pneumatic gun
Dilution rate: 5 to 10% per coat
20% pistol

PRECAUTIONS FOR USE

• Do not apply at a temperature <8 ° C and> 35 ° C and a humidity rate> 70%.
• Do not apply on overheated funds.

TECHNICAL CHARACTERISTICS

Final aspect of the dry film: Brilliant
Density: 1.20 + - 0.05
Dry extract: 50% + - 1
Coverage & Yield: 12 to 14 m2 per kg depending on the state of the support and the method of application.
Dust-free drying: 30 minutes
Dry: 3 to 4 hours depending on the humidity
Recoverable: 8 hours
Storage: 12 months in original packaging, unopened, stored away from high temperatures
Packaging: 20kg / 4kg